Filter
Top Products
The MAIN VIDEO OUTPUTS provide video output in the Main
Zone. One component (BNC), two composite, and two
S-video outputs are available. The component video output is
only available when component video inputs are used.
Composite video outputs are available when composite or
S-video inputs are used. S-video outputs are only available
when S-video inputs are used. Output 1 (OSD) incorporates
the on-screen display; output 2 does not.
The ZONE 2 AUDIO OUTPUTS provide analog audio output in
Zone 2. Two stereo outputs (one fixed, one variable) are
available. The variable output includes a built-in volume
control; the fixed output does not.
The RECORD AUDIO and VIDEO OUTPUTS provide audio
and video output in the Record Zone. Two composite, two
S-video, two analog stereo (one fixed, one variable), one
S/PDIF coaxial, and one S/PDIF optical outputs are available.
Note:
When analog input sources are used, the ZONE 2
and RECORD AUDIO OUTPUTS are about 2dB higher
than the MAIN AUDIO OUTPUTS labelled FRONT
L/R. When digital input sources are used, the ZONE 2
and RECORD AUDIO OUTPUTS are about 8dB higher
than the MAIN AUDIO OUTPUTS labelled FRONT
L/R. This is to accommodate THX level requirements.
The AES/EBU and S/PDIF INPUTS provide digital audio input.
One AES/EBU, six S/PDIF coaxial, and six S/PDIF optical
(including one optical mini jack) inputs are available.
. . . continued on page 2-6
The Power Switch disconnects power to the AC input
connector.
The AC Input Connector provides power to the unit via the
supplied power cord (3 wire, 10 amp, IEC 320).
The VIDEO INPUTS provide video input in the Main and
Record Zones. Eight S-video, five composite video, and four
component video inputs are available in the Main Zone. All can
be assigned in the INPUT SETUP menu (see page 3-3). S-video
and composite video inputs are available in the Record Zone.
The AUDIO INPUTS provide analog audio input in all zones.
Eight stereo analog input pairs labeled 1 to 8 are available.
Pairs 6, 7, and 8 can be configured as a 5.1-channel analog
input. These pairs function as (L)/(R), (C)/(SUB), and (LS)/(RS)
when the 5.1-channel analog input is selected (see page 3-30).
The MAIN AUDIO OUTPUTS provide analog audio output in
the Main Zone. Ten outputs labeled FRONT L/R, CENTER, LFE,
SUBWOOFER L/R, SIDE L/R, and REAR L/R are available. The
AUX L/R outputs are reserved for future expansion.
The balanced MAIN and ZONE 2 AUDIO OUTPUTS provide
analog audio output in the Main Zone and Zone 2. Ten
outputs labeled FRONT L/R, CENTER, LFE, SUBWOOFER L/R,
SIDE L/R, and REAR L/R are available in the Main Zone. The
AUX L/R outputs are reserved for future expansion. Two
connectors labeled ZONE 2 L/R are available as a variable
stereo output for Zone 2.
2-5
Basic Operation
SDP-40
3
1
2
4
5
6
7
8
9
10