Filter
Top Products
5-14
The MODE ADJUST Menu
JBL
dts(-ES) LOGIC7 Music
• A proprietary Lexicon listening mode.
• Designed for playback of 5.1 and 6.1-channel dts(-ES) music
sources.
• Based on dts(-ES) LOGIC7 FILM, but specifically tailored for
music sources.
• Recommended for 5.1 and 6.1-channel dts(-ES) music sources,
even when only one pair of surround speakers is selected.
• The unit will automatically activate ES decoding when a dts-ES
input type is identified.
Default
Parameter Value Values
VOCAL ENHANCE +0.0dB +0.0dB, +3.0dB, +6.0dB
5 SPKR ENHANCE OFF ON, OFF
BASS ENHANCE OFF ON, OFF
REAR DLY OFFSET 15ms 0 to 30ms
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS See page 5-17 for more information
CUSTOM See page 5-17 for more information
An alphabetical listing of parameter descriptions begins on page 5-20.
dts(-ES) THX
• Designed for playback of 5.1 and 6.1-channel dts(-ES)-
encoded sources.
• Utilizes dts(-ES) to decode 5.1 or 6.1 discrete channels from
dts(-ES) encoded input types.
• Applies re-equalization and timbre matching. Re-equalization
simulates the high-frequency rolloff that occurs in a movie
theater as sound travels from the speakers to the listeners. Most
films are mixed for movie theaters, and may sound too bright
when played back in a home theater without re-equalization.
Timbre matching helps minimize the timbre differences
between the front and side channels, which results in smoother
sound movements between these channels.
• Recommended for home theaters with a THX-certified speaker
system.
• The unit will automatically activate ES decoding when a dts-ES
input type is identified.
Default
Parameter Value Values
RE-EQUALIZER ON ON, OFF
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS See page 5-17 for more information
CUSTOM See page 5-17 for more information
An alphabetical listing of parameter descriptions begins on page 5-20.
dts(ES) MUSIC
MODE ADJUST
MODE ADJUST