Filter
Top Products
MODE PARAMETER DESCRIPTIONS
5 SPKR ENHANCE (ON, OFF)
5 SPKR ENHANCE (Five Speaker Enhance) simulates seven speaker
playback through a five speaker system. When set to ON, the unit
provides an increased sense of spaciousness and envelopment
through two surround speakers. This enhancement is most
noticeable when these surround speakers are positioned to the side
of the listening position, or when the listening position is located
against the rear wall. The effectiveness of this parameter varies
within the listening space. For optimum results, position the side
speakers to the left and right of the primary listening position.
ACADEMY FILTER (ON, OFF)
When set to ON, ACADEMY FILTER restores the proper tonal
balance of older mono film sources, which generally have much
narrower frequency responses than current mono film sources.
AUTO AZIMUTH (ON, OFF)
AUTO AZIMUTH maximizes the output accuracy of the listening
mode. When set to ON, the unit continually monitors the
2-channel input signal. It automatically adjusts the relative level
and time offset of the input channels to ensure that signals are sent
to the appropriate channels with maximum separation. When set
to OFF, the accuracy of the listening mode varies depending on the
input source. This parameter should be set to ON for film and TV
sources, and OFF for music sources.
5-20
The MODE ADJUST Menu
JBL
dts STATUS MENU
The dts STATUS menu will appear when a dts(-ES) listening mode
is selected. It features L, C, R, SL, SR, SB, and LFE level meters (see
page 5-18 for more information). The SB level meter will not
appear unless a 6.1-channel input type is selected.
Parameter Values
INPUT The name of the selected input
MODE The name of the selected listening mode
CHANNELS 3/3.1, 3/2.1
ES DECODE MATRIX, DISCRETE, OFF
SAMPLE RATE 44.1kHz, 48kHz
An alphabetical listing of parameter descriptions begins on page 5-20.