Filter
Top Products
5-11
The MODE ADJUST Menu
SDP-40
DOLBY DIGITAL
• Designed for playback of 5.1 Dolby Digital encoded sources.
• Decodes 5.1 discrete channels from 5.1 Dolby Digital
encoded input types. The five main channels are full-
frequency. The .1 channel, often referred to as the LFE or
subwoofer channel, has a limited frequency range of 120Hz.
• Appropriate for Dolby Digital encoded film sources.
Default
Parameter Value Values
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS See page 5-17 for more information
CUSTOM See page 5-17 for more information
An alphabetical listing of parameter descriptions begins on page 5-20.
5.1 2-CHANNEL
• Designed for conversion of 5.1-channel Dolby Digital input
types to LOGIC7 encoded 2-channel output types.
• Allows 5.1-channel Dolby Digital sources to be listened to
through the front left and right channels.
• Reproduces the original 5.1 performance through playback of
LOGIC7 listening modes.
• Recommended for recording purposes.
Default
Parameter Value Values
CENTER MIX +0dB -25 to +5dB
SURROUND MIX +0dB -5 to +5dB
CNTR DLY SAMPLES +0 -127 to +127
MASTER LEVEL +0dB -5 to +5dB
COMPRESSION OFF AUTO, ON, OFF
LFE MIX +0.0dB -20.0 to +0.0dB
SUB L/R LVL +0dB OFF, -30 to +12dB
CUSTOM See page 5-17 for more information
An alphabetical listing of parameter descriptions begins on page 5-20.
L7 DIGITAL
MODE ADJUST
5.1 2-CHANNEL
MODE ADJUST