Filter
Top Products
LFE (ON, OFF)
LFE (Low Frequency Effects) activates and deactivates the MAIN
AUDIO OUTPUT labelled LFE. Selecting this parameter accesses the
pulldown menu pictured above. Use the up and down MENU
arrows to switch between the ON and OFF settings. Press the right
MENU arrow to select the desired setting. Press the left MENU
arrow to close the pulldown menu and return to the
CUSTOM SETUP menu.
When the LFE parameter is set to ON, the unit sends the LFE
channel to the LFE output. When set to OFF, the unit deactivates
the LFE output and sends the LFE channel to the SUBWOOFER L/R
outputs. If the SUBWOOFER L/R outputs are set to NONE, the LFE
channel is sent to the MAIN AUDIO OUTPUTS with the lowest
crossover setting.
3-23
The SETUP Menu
SDP-40
For example, LFE is set to OFF, SUBWOOFER L/R is set to NONE,
FRONT L/R is set to 40Hz, and the rest of the MAIN AUDIO
OUTPUTS are set to 60Hz. The LFE channel will be sent to the
FRONT L/R outputs, utilizing the 40Hz crossover point.
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
CUSTOM SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUB L/R MONO
SUB XOVER 80Hz
LFE
OFF
SPEAKER SETUP
CUSTOM SETUP
SYNTHESIS 7CH SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
80Hz
M
SUB
L
80Hz
C
80Hz
R
80Hz
SR
80Hz
80Hz
SL
80Hz
RR
80Hz
RL