Filter
Top Products
Chapter 4 Setup Utility: When to Run
53
Server Menu (continued)
Feature Option Description
Baud Rate 9600
19.2 K
38.4 K
115.2 K
Select the baud rate.
Flow Control No Flow Control
CTS/RTS
XON/XOFF
CTS/RTS + CD
Select the flow control.
• CTS/RTS = Hardware
• XON/XOFF = Software
• CTS/RTS + CD = Hardware + carrier detect for
modem use.
Processor Retest
No
Yes
Yes causes the BIOS to clear historical processor status
and retest all processors on the next boot.
EMP Password Switch
Disabled
Enabled
Enable or disable the EMP password.
EMP ESC Sequence The front panel controller firmware updates this field.
EMP Hangup Line
String
The front panel controller firmware updates this field.
Modem Init String This string accepts up to 16 characters. The upper four
characters will go to the next field which will pop up as
soon as the 16th character is filled. Trying to fill the 17th
character in the same field will have a wraparound
problem.
EMP Access Mode Preboot Only
Always Active
Disabled
Preboot Only—EMP enabled during power down or
POST.
Always Active—EMP always enabled.
Disabled—EMP disabled.
EMP Restricted Mode
Access
Disabled
Enabled
When enabled, power down, front panel NMI, and reset
control via EMP are disabled. Restricted mode can be
selected with preboot or always active.
EMP Direct
Connect/Modem
Mode
Direct Connect
Modem Mode
You can connect directly to the port or use a modem.