165
14 Removable Media Drives:
Installing/Removing/Replacing
This chapter tells how to remove and reinstall removable media drives.
Warnings and Cautions
Only a qualified service technician is authorized to remove the server covers and to access any of
the components inside the server. Before removing the covers, see “Safety Guidelines” on
page 115.
Tools and Supplies You Need
• Phillips (cross-head) screwdriver (#1 bit and #2 bit)
• Small flat-bladed screwdriver
• Antistatic wrist strap (recommended)
• Pen or pencil
Equipment Log
Use the equipment log form provided in Appendix B, “Equipment Log,” to record the model and
serial numbers of the server, all installed options, and any other pertinent information about the
server. You will need this information when running the SSU.
Diskette Drive
The 3.5-inch diskette drive in the 3.5-inch user-accessible drive bay supports 720 KB, 1.25 MB,
1.44 MB, and 2.88 MB media. Contact your sales representative or dealer for a list of approved
add-in devices.