Filter
Top Products
Chapter 13 Server Components: Removing/Reinstalling
161
Reinstalling the Peripheral Bay Backplane
See Figure 13-19.
1. Observe the precautions on page 115, “Safety Guidelines.”
2. Remove the board from the antistatic protective wrapper if you placed it in one.
3. Position and align the board over the two alignment pins.
4. Reinstall the eight securing screws removed earlier.
5. Reinstall the peripheral bay as described earlier.
OM07355
= A
= B
Figure 13-19. Peripheral Bay Backplane
A. Snap-on standoffs (two)
B. Screws (eight)