Filter
Top Products
Chapter 4 Setup Utility: When to Run
49
Advanced Menu (continued)
Feature Option Description
Serial Port B Disabled
Enabled
Auto
Configure serial port B using these options:
• Disabled—no configuration.
• Enabled—user configuration.
• Auto—BIOS or OS chooses the configuration.
• OS Controlled—displayed when controlled by
the OS.
Base I/O Address 3F8
2F8
3E8
2E8
Set the base I/O address for serial port B.
Interrupt
IRQ3
IRQ4
Set the interrupt for serial port B.
Parallel Port Disabled
Enabled
Auto
Configure the parallel port using these options:
• Disabled—no configuration.
• Enabled—user configuration.
• Auto—BIOS or OS chooses the configuration.
• OS Controlled—displayed when controlled by
the OS.
Mode Output only
Bidirectional
EPP
ECP
Set the mode for the parallel port.
Interrupt IRQ5
IRQ7
Set the interrupt for the parallel port.
Diskette Controller Disabled
Enabled
Auto
Configure the diskette controller using these options:
• Disabled—no configuration.
• Enabled—user configuration.
• Auto—BIOS or OS chooses the configuration.
• OS Controlled—displayed when controlled by
the OS.
Base I/O Address
Primary
Secondary
Set the base I/O address for the diskette controller.
Advanced Chip Set
Control
Address Bit Permuting Disabled
Enabled
Enabled automatically sets two-way or four-way
permuting based on the memory configuration. Enabled
requires:
• number of rows to be a power of two.
• all rows to be the same size.
• all populated rows to be adjacent and start at row 0.
Card to Card
Interleave
Disabled
Enabled
Enabled requires a symmetric RAM configuration
between two memory modules.
continued