Filter
Top Products
AC450NX Rack Server System Product Guide
44
Each time you turn on or reboot your server POST begins and, after a few seconds, displays this
message:
Press <F2> to enter Setup
After pressing F2, a few seconds may pass before entering Setup while POST completes tests and
initialization functions. When the F2 prompt disappears, pressing F2 will have no effect. When
Setup is entered, the Main Menu options page is displayed.
Use the following keys to navigate through the menus and submenus.
Press To
F1 Get help about an item
ESC Go back to a previous item
↑ Select the previous value in a menu option list
↓ Select the next value in a menu option list
← → Select a major menu
- Change the value of the current menu item to the previous value
+ Change the value of the current menu item to the next value
Enter Activate submenus, select feature options, and change feature values
F9 Display the following message:
Setup Confirmation
Load default configuration now?
[Yes] [No]
The [Yes] button will be highlighted. If you press <Enter>, all Setup fields return to their
default values. If you press <ESC> or select No, the server returns to the configuration it had
before you pressed <F9>, without affecting any existing field values.
F10 Display the following message:
Setup Confirmation
Save configuration changes and exit now?
[Yes] [No]
The [Yes] button will be highlighted. If you press <Enter>, all current Setup values are saved,
and the system is reset. If you press <ESC> or select No, the server returns to the
configuration it had before you pressed <F10>, without affecting any existing values.