Filter
Top Products
Graphical user interface (GUI) menu
80 En
■ Stereo program parameter descriptions
■ Compressed Music Enhancer mode parameter descriptions
■ Decoder parameter descriptions
Rev. Level
Reverberation level. Adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes.
Control range: 0 to 100%
Sound field
parameter
Features
Direct
(“2ch Stereo” only)
2-channel stereo direct. Bypasses the decoders and DSP processors of this unit for pure hi-fi stereo sound when playing 2-channel analog
sources.
Choices: Auto, Off
y
• Select “Auto” to bypass the decoders, DSP processors and the tone control circuitry only when “BASS” and “TREBLE” are set to “BYPASS” (see
page 61).
• Select “Off” not to bypass the decoders, DSP processors and the tone control circuitry when “BASS” and “TREBLE” are set to “BYPASS”.
• When multi-channel signals are input, they are downmixed to 2 channels and output from the front left and right speakers.
• The low-frequency signals of the front left and right channels are redirected to the subwoofer in the following cases:
– “Bass Out” is set to “Front & SWFR” (see page 85).
– “Front” is set to “Small” (see page 84) and “Bass Out” is set to “SWFR” (see page 85).
Center Level
Surround L Level
Surround R Level
Sur.Back L Level
Sur.Back R Level
F.PRNS L Level
F.PRNS R Level
R.PRNS L Level
R.PRNS R Level
(“11ch Stereo” only)
11-channel stereo center, surround left, surround right, surround back, presence left and presence right levels. Adjusts the volume level of
each channel in the 11-channel stereo mode. The available parameters differ depending on the speaker settings.
Control range: 0 to 100%
The Compressed
Music Enhancer
mode
Features
Level
(“Straight Enhancer”
and “11ch Enhancer”
only)
Straight enhancer or 11-channel enhancer effect level. Select “High” or “Low” to adjust the effect for the high-frequency.
Choices: High, Low
Decoder parameter Features
Panorama
(“PLIIx Music” and “PLII Music”
only)
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well as the front
speakers for a wraparound effect.
Choices: Off, On
Center Width
(“PLIIx Music” and “PLII Music”
only)
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely towards the center
speaker or towards the front left and right speakers. A larger value moves the center channel output towards the front left
and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
Sound field
parameter
Features
Source sound
Level
Rev. Level
Time