Remote control features
104 En
Use the setup mode of the remote control to customize the remote
control.
1 Press GSETUP on the remote control using a
ballpoint pen or similar object.
“SETUP” appears in the display window on the remote control.
2 Press 9k / n repeatedly to select the desired setup
mode.
3 After the configurations, press GSETUP again to
exit from the setup menu.
If you do not complete each of the operations within 30 seconds, this unit
automatically exits from the setup menu.
You can set the backlight mode of the remote control.
1 Press GSETUP on the remote control using a
ballpoint pen or similar object.
“SETUP” appears in the display window (4) on the remote
control.
2 Press 9k / n repeatedly to select “LIGHT” and then
press 9ENTER.
“LIGHT” and the current “LIGHT” setting appears in the
display window (4) alternately.
3 Press 9k / n to select the desired setting.
4 Press 9ENTER to confirm the setting.
“OK” appears in the display window (4).
5 Press GSETUP again to exit from the setup mode.
y
You can light up the backlight by pressing 6LIGHT anytime.
You can control other components by setting the appropriate remote
control codes. Codes can be set up for each control area. For a
complete list of available remote control codes, refer to “List of
remote control codes” at the end of this manual.
The following table shows the default component (Library:
component category) and the remote control code for each control
area.
Remote control code default settings
You may not be able to operate your Yamaha component even if a Yamaha remote
control code is preset as listed above. In this case, try setting another Yamaha remote
control code.
Customizing the remote control
Setup mode Descriptions
Page
SETUP
Top setup mode menu.
–
LEARN
Learning mode. Use this feature to program codes
from other remote controls.
105
P-SET
Preset mode. Use this feature to change the remote
control code of each control area.
104
RNAME
Renaming mode. Use this feature to change the
name of each control area.
106
MACRO
Macro programming mode. Use this feature to set
the macro program.
108
CLEAR
Clearing mode. Use this feature to clear the
configurations of this unit.
109
ERASE
Erase mode. Use this feature to erase the learned
functions of each button.
109
EX-IR
Extended IR code mode. This feature is for the
authorized custom installers only.
—
LIGHT
Backlight mode. Use this feature to set the light up
mode of the remote control.
104
Note
Setting the backlight mode of the remote
control (LIGHT)
LIGHT
ON
Current “LIGHT” setting
Choice Descriptions
ON
Lights up the backlight when a button is pressed
or the remote control detects a motion.
OFF
Lights up the backlight only when 6LIGHT is
pressed.
Setting remote control codes (P-SET)
Control area
Library
(component
category)
Manufacturer
Default
code
MULTI DVD Yamaha 04306
V-AUX — — —
PHONO — — —
MD TAPE MD Yamaha 00409
BD
HD DVD
DVD Yamaha 04306
DVD DVD Yamaha 04306
CD CD Yamaha 01105
CD-R CD-R Yamaha 01405
CBL
SAT
———
DTV — — —
DVR DVR Yamaha 00707
VCR — — —
TUNER SOURCE Yamaha 00012
DOCK SOURCE Yamaha 00012
NET
USB
SOURCE Yamaha 00012
(TAPE)
TAPE Yamaha 00311
TV — — —
Note