Filter
Top Products
Remote control features
108 En
■ Default macro functions
*1 Set the appropriate remote control code for TV in advance (see
page 104).
*2 This unit plays the last received station or selected contents before the
unit was set in the standby mode.
■ Programming macro operations (MACRO)
You can program your own macro and use the macro programming
feature to transmit several remote control commands in sequence at
the press of a button. Be sure to set up remote control codes or
perform learning operations before programming the macro.
• The default macro is not cleared when a new macro is programmed for a button. The
default macro can be used again when the programmed macro is cleared.
• It is not possible to add a new signal (macro step) to the default macro. Programming
a macro changes all macro contents.
• We do not recommend that you program continuous operations (for example, volume
control) in a macro.
1 Press GSETUP on the remote control using a
ballpoint pen or similar object.
“SETUP” appears in the display window (4).
2 Press 9k / n repeatedly to select “MACRO” and then
press 9ENTER.
The remote control enters the macro-programming mode.
“MACRO” and “M:the three-letter name of the selected control
area” (for example, “M:DVD”) appears in the display window
(4) alternately.
3 Press the desired macro button you want to assign
the macro program to and then press 9ENTER.
“M:the three-letter name of the selected macro button” (for
example, “M:DVD”) and the name of the currently selected
control area appears in the display window (4) alternately.
When you press DSTANDBY or EPOWER, “M:STB” or
“M:PWR” and the name of the currently selected control area
appears in the display window (4) alternately.
4 Press the buttons for the functions you want to
include in the macro operation in sequence.
Example
Set the input source to DVD
→ Turn on the DVD player →
Turn on the video monitor
Step 1 (“MCR1”): Press DVD.
Step 2 (“MCR2”): Press AV POWER.
Step 3 (“MCR3”): Press TV POWER.
• To change the selected input area, press
5
SELECT l / h. Pressing the
input selector buttons or will program a macro step, whereas
5
SELECT l / h only changes the selected input area.
• The position of the operation mode selector (AMP/TV/SOURCE) affects the
assigned function. When the operation mode selector is set to FAMP or
FTV, the input source selectors do not function.
5 Press HMACRO to confirm the program.
You can set up to 10 steps (10 functions). After you have set 10
steps, “FULL” appears and the remote control automatically
exits from the macro programming mode.
Pressing
macro
To automatically transmit these signals
First Second
—
Notes
STANDBY STANDBY
POWER
POWER
POWER
TV
(*1)
MULTI MULTI
V-AUX V-AUX
PHONO PHONO
MD
TAPE
MD
TAPE
BD
HD DVD
BD
HD DVD
DVD DVD
CD CD
CD-R CD-R
CBL
SAT
CBL
SAT
DTV DTV
DVR DVR
VCR VCR
TUNER TUNER
DOCK DOCK
NET
USB
NET
USB
(*2)
Notes
MACRO M:DVD
DVD CD
V-AUXMULTI
AVTV
PHONO
CD-R
POWER
STANDBY
POWERPOWER
DTV DVR VCR
DOCK
TUNER
BD
HD DVD
MD
TAPE
CBL
SAT
NET
USB
1
23
Indicates the number of macro
steps entered
Flashes alternately so you can set the
next step
(Selected macro button)
(Selected control area)
MCR 1
M:DVD
DVD