Filter
Top Products
8
4 Press ENTER.
“Complete!” appears and the station is
stored.
5 Repeat steps 1 to 4 to preset other
stations.
To tune in a station with a weak
signal
Press + or – repeatedly in step 2 to tune in the
station manually.
To set another station to the
exist preset number
Start over from step 1. After step 3, turn the jog
dial to select the preset number on which you want
to store the station.
To erase a preset station
1 Keep pressing TUNER MEMORY until a
preset number flashes in the display.
TUNED
STEREO
2 Turn the jog dial to select the preset number
you want to erase.
Select “All Erase” when you want to erase all
the preset stations.
3 Press ENTER.
“Complete!” appears.
When you erase a preset number, the preset
number decreases by one and all preset
numbers following the erased one are
renumbered.
Step 3: Presetting radio
stations
You can preset the following number of stations:
20 for FM, 10 for AM.
4
213
?/1 (Power)
Jog dial
1 Press TUNER BAND repeatedly until
the band you want appears in the
display.
Every time you press this button, the band
changes as follows:
FM y AM
2 Press and hold + or –.
The frequency indication changes and the
scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo programme) appear.
TUNED
STEREO
3 Press TUNER MEMORY.
A preset number appears in the display.
The stations are stored from preset number 1.
Preset number
TUNED
STEREO