Sony DHC-NX5MD Stereo System User Manual


 
76
Self-diagnosis Display
(continued)
Specifications
Amplifier section
European model
DIN power output (rated) 80 + 80 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz, 10% THD)
Music power output (reference)
160 + 160 watts
(6 ohms at 1 kHz, 10% THD)
Other models
DIN power output (rated) 90 + 90 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
110 + 110 watts
(6 ohms at 1 kHz, 10% THD)
Inputs
VIDEO IN: voltage 250 mV
(phono jacks) impedance 47 kilohms
TAPE IN: voltage 250 mV
(phono jacks) impedance 47 kilohms
Outputs
TAPE OUT: voltage 250 mV
(phono jacks) impedance 1 kilohms
PHONES: accepts headphones of 8 ohms or
(stereo mini jack) more
FRONT SPEAKER: accepts impedance of 6 to 16 ohms
REAR SPEAKER: accepts impedance of 16 ohms
SUPER WOOFER: voltage 1 V, impedance 1 kilohms
CD player section
System Compact disc and digital audio
system
Laser Semiconductor laser
(λ=780 nm)
Emission duration: continuous
Laser output Max. 44.6 µW*
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with 7 mm
aperture.
Wavelength 780 – 790 nm
Frequency response 20 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio More than 90 dB
Dynamic range More than 90 dB
TUNER
Cannot Edit
You tried to label or erase a non-preset station.
CD
“Check” and “CD Position” appear
alternately
The disk could not be read properly.
No disc
There is no disc in the CD player.
Over
You have reached the end of the CD while
pressing and holding M during pause.
Push CD stop!
You pressed PLAY MODE during play.