Sony DHC-NX5MD Stereo System User Manual


 
7
Getting Started
Step 2: Setting the time
You must set the time beforehand to use the timer
functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system is used for illustration
purposes.
1
3,5 2,4
1 Press CLOCK/TIMER SET.
The hour indication flashes.
2 Press V or v to set the hour.
3 Press ENTER.
The minute indication flashes.
4 Press V or v to set the minute.
5 Press ENTER.
The clock starts.
Tips
If you’ve made a mistake, start over from step 1.
Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY (European model) or DEMO
(STANDBY) (other models) when the power is off.
To change the time
The previous explanation shows you how to set
the time while the power is off. To change the
time while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Press V or v to select the SET CLOCK.
3 Press ENTER.
4 Perform steps 2 through 5 above.
Note
The clock settings are cancelled when you disconnect
the mains lead or if a power failure occurs.