Filter
Top Products
21
The CD Player
1 Press CD to switch the function to CD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3 Press one of the DISC 1 – 5 to select a
CD.
4 Turn the jog dial until the desired track
appears.
To programme all the tracks on a CD at
once, turn the jog dial to select “AL”.
To cancel Programme Play
Press PLAY MODE repeatedly until
“PROGRAM” and “SHUFFLE” disappear.
To Press
CHECK on the remote repeatedly
in stop mode. After the last track,
“Check End” appears.
Check the
programme
CLEAR on the remote in stop
mode.
Clear a track
from the end
CHECK on the remote repeatedly
in stop mode until the number of
the track to be erased lights up,
then press CLEAR.
Clear a specific
track
1Select the disc tray with a DISC
1 – 5 button.
2Select the track by turning the
jog dial.
3Press ENTER.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press CD H.
• “--.--” appears when the total CD programme time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.
Note
You cannot change PLAY MODE during Programme
Play.
Add a track to
the programme
in stop mode
Playing time of the
selected track
3
PROGRAM
Track number
5 Press ENTER.
The track is programmed. The step number
appears, followed by the number of the last
programmed track and the total playing time
of the programme.
Total playing time
PROGRAM
3
Last programmed track
6 To programme additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7 Press CD H.
Programme Play starts.
All the tracks play in the order you selected.
Disc number