Filter
Top Products
13
Basic Operations
Tips
• If you use a partially recorded MD, recording starts
after the recorded tracks.
• The track numbers of the CD are recorded on to the
MD automatically.
• Depending on the disc, CD TEXT information may
also be recorded. If “CD TEXT” flashes during
recording, press NAME EDIT/CHARACTER, and
then press ENTER/YES to record the title of the
current track. (If “CD TEXT” is lit, it is
automatically recorded.)
If the MD becomes full during
recording
The CD player and the MD deck stop
automatically.
Notes
• If the play mode is set to the Repeat or Shuffle Play,
it automatically switches to normal play at step 3.
• If the MD is record protected, “C11” and
“Protected” appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position (see page 27).
• If “Retry” flashes in the display, a reading failure
has occurred, and the system is trying to read the
data again (see page 14).
• Auto Cut function will not operate during Synchro-
recording.
Recording a CD on an
MD at high speed
— High-Speed CD-MD Synchro Recording
This function allows you to record a CD on an
MD at twice the speed of normal CD-MD Synchro
Recording.
2
1
3
4
5
CD s
MD s
43
1 Insert a recordable MD.
2 Place a CD that you want to record.
To record tracks in the order you
programmed, press PLAY MODE repeatedly
until “PROGRAM” appears. (If you have not
made a programme, see page 20.)
3 Press CD SYNC HIGH SPEED.
“×2” appears in the display. “MD New
Track” and remaining recordable time on the
MD appear alternately.
The MD deck stands by for recording and the
CD player pauses for play.
4 Press MD S.
High-speed recording starts. You cannot
monitor the recorded signal nor pause
during recording. When the recording is
completed, the CD player and the MD deck
stop automatically.
continued