Filter
Top Products
59
Sound Adjustment/Other Features
3 Press TUNER NAME.
The text input screen appears, and the cursor
flashes.
4 Press CHARACTER on the remote
repeatedly to select the desired type of
character.
Each time you press the button, the display
changes as follow:
(Blank space) t A (Upper cases) t a
(Lower cases) t 0 (Numbers) t ’
(Symbols) t (Blank space) t
…
5 Turn the jog dial (or press V/v on the
remote) to select the desired character.
To enter a blank space
Press M (or b on the remote) without
turning the jog dial.
To enter a symbol
You can use the following 24 symbols.
’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ `
6 Press M.
The character you selected in step 5 stops
flashing and the cursor shifts to the right.
7 Repeat steps 4 to 6 to complete the
entire title.
If you make a mistake
Press m or M (or B/b on the remote)
until the character you want to change
flashes, then repeat steps 4 to 6.
To erase a character
Press CLEAR on the remote while the
character is flashing. You cannot insert
characters.
8 Press ENTER to complete the labelling
procedure.
continued
Other Features
Labelling the preset
stations
— Station Name
You can label each preset station with up to 12
characters (Station Name). The Station Name
appears when you tune in the station.
86
31
2,5
4
5
?/1 (Power)
1 Press TUNER BAND to select the band
you want.
2 Turn the jog dial to tune in the desired
preset station.