Filter
Top Products
The MD Deck
— Editing
43
Checking the titles
To check the disc titles, press SCROLL on the
remote in stop mode. To check the track title,
press SCROLL during play. The title appears
scrolling in the display. To stop scrolling, press
SCROLL. Press the button again to resume
scrolling.
Erasing the titles
1 Press MENU/NO in stop mode.
2 Turn MD JOG until “Name?” appears, then
press ENTER/YES.
3 Turn MD JOG until “Nm Erase?” appears, then
press ENTER/YES.
4 Turn MD JOG until the desired title to erase
appears, then press ENTER/YES.
“Complete!” appears and the title is erased.
Erasing all titles
1 Press MENU/NO.
2 Turn MD JOG until “Name?” appears, then
press ENTER/YES.
3 Turn MD JOG until “Nm All Ers?” appears,
then press ENTER/YES.
“Nm All Ers??” appears.
4 Press ENTER/YES.
“Complete!” appears and all titles are erased.
To cancel erasing
Press MENU/NO.
To return to the condition before
labelling or erasing
You can return to the original condition
immediately after labelling or erasing a title (see
page 51).
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily. You can restore the contents to
the condition before erasing (unerase) by using the
Undo function. Note, however, you cannot undo
an edit after performing any additional edits.
The three options for erasing recordings are:
• Erasing a single track. (ERASE)
• Erasing all tracks. (ALL ERASE)
• Erasing a portion of a track. (A-B ERASE)
Erasing a single track (ERASE)
You can erase a track simply by selecting its track
number. When you erase a track, the total number
of tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
Eg.: Erasing track 2.
123
123
4
AB
AC D
CD
Erase track 2
Original
tracks
After
ERASE
Track
number
When erasing multiple tracks, you should proceed
in order from high to low track number to prevent
the renumbering of tracks that have not been
erased yet.
continued