Filter
Top Products
60
Labelling the preset stations
(continued)
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
programme signal. This tuner offers convenient
RDS features like station name display and
location of stations by programme type. RDS is
available only on FM stations.*
Note
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
, Simply select a station from the FM
band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
To cancel labelling
Press TUNER NAME.
To check the preset number and
frequency
The station name appears when you tuned the
labelled station.
To check the preset number and frequency, press
DISPLAY. The preset number and frequency are
displayed for 4 seconds and it returns to the station
name display.
To erase the name
1 Repeat steps 1 to 3.
2 Press CLEAR on the remote repeatedly to erase
the name.
3 Press ENTER.
Note
When the tuner receives an RDS broadcast, the RDS
station name appears instead of the station name you
have programmed in the memory.