Filter
Top Products
16
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see page 8).
?/1
(Power)
1 Press TUNER BAND repeatedly until
the band you want appears in the
display.
Every time you press the button, the band
changes as follows:
FM y AM
2 Turn the jog dial to tune in the desired
preset station.
VOLUME
–/+ 1
STEREO/MONO
Jog dial
Turn counter-
clockwise for
lower preset
numbers.
Turn clockwise
for higher
preset numbers.
Preset number Frequency
TUNED
STEREO
When only one station is preset, “One Preset”
appears in the display.
To Do this
Turn off the radio Press ?/1 (power).
Adjust the volume Turn VOLUME.
To listen to non-preset radio
stations
Use manual or automatic tuning. For manual
tuning, press – or + repeatedly. For automatic
tuning, press and hold – or +.
Tips
• Pressing TUNER BAND when the system is off
automatically turns on the system and tunes in the
last received station (One Touch Play).
When the system is in the Power Saving Mode, the
One Touch Play function does not work.
• You can switch from another source to the tuner
just by pressing TUNER BAND (Automatic
Source Selection).
• When an FM stereo programme has static noise,
press STEREO/MONO until “MONO” appears in
the display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied aerials.