Filter
Top Products
36
Labelling the preset
stations
— Station Name
You can label each preset station with up to
12 characters (Station Name).
1 Tune the desired station you want to
label (see “Listening to the radio” on
page 35).
2 Follow the same procedures as from
step 3 to 8 of “Labelling a CD” on page
12.
To erase the name
1 Tune the station.
2 Press NAME EDIT/CHARACTER on the
remote.
3 Press CLEAR on the remote repeatedly to
erase the name.
4 Press ENTER/YES.
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display and
location of stations by program type. RDS is
available only on FM stations.*
Note
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.