Filter
Top Products
38
Tape – Recording
Recording a CD on a tape
— CD-TAPE Synchro Recording
1 Load a blank tape.
2 Load a CD you want to record.
3 Press SYNCHRO MODE repeatedly until
“CDtTAPE SYNC?” appears.
4 Press ENTER/START.
The tape deck stands by for recording and
the CD player pauses for play.
When you want to record on the bottom
side, press TAPE n N.
5 Press PLAY MODE/DIRECTION
repeatedly until g appears to record
on one side or h (or j) to record on
both sides.
6 Press ENTER/START.
Recording starts.
To stop recording
Press x.
Tips
• When you record on both sides, be sure to start
from the top side. If you start from the bottom side,
recording stops at the end of the bottom side.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side.
• You can record only your favourite CD tracks with
Programme Play. After step 2, follow the same
procedures as step 1 to 6 in “Programming CD
tracks” on page 11. Then go to step 3.
Recording on an MD and a
tape at the same time
Place the CD you want to record.
Then, insert a blank tape and a recordable
MD. Press SYNCHRO MODE repeatedly
until “DUAL SYNC?” appears, then press
ENTER/START twice.
To stop recording
Press x.
Tips
• Even if the MD or the tape ends part-way through
the recording, the other continues recording.
• If you select both sides recording and the tape
reaches the end of the top side part-way through a
track, the entire track is recorded again from the
beginning of the bottom side. In this case, the entire
track may also be recorded again on the MD.
• You can record only your favourite CD tracks with
Programme Play. After inserting a blank tape and a
recordable MD, follow the same procedures as step
1 to 6 in “Programming CD tracks” on page 11.
Then press SYNCHRO MODE.