Filter
Top Products
10
Tips
• You can start playing from the desired track in
Normal Play or Programme Play. Turn ./>
(or press . or > on the remote) until the
desired track number appears after step 1.
• The CD 1 – 3 button lights orange when a CD is
loaded on the tray.
All of the CD 1 – 3 button indicators light orange at
first, and then turn on/off if the system determines
that a CD is not loaded after the CD tray is opened
and closed, etc.
Note
The play mode cannot be changed while playing a
disc.
Playing a CD (continued)
Press REPEAT during play until
“REPEAT” or “REPEAT 1”
appears.
REPEAT*: For all the tracks on
the CD up to five times.
REPEAT 1: For a single track
only.
To cancel playing repeatedly, press
REPEAT until “REPEAT” or
“REPEAT 1” disappears.
* You cannot select “REPEAT” and “ALL DISCS
SHUFFLE” at the same time.
Find a point in
a track
Keep pressing m or M during
play and release it at the desired
point.
Select a CD • Press CD 1 – 3. Play starts when
the button is pressed.
• Press DISC SKIP on the remote
repeatedly so that CD 1 – 3
appears. Press CD NX (or N
on the remote) to play the
selected CD.
If you press CD 1 – 3 during play,
the selected CD changes and the
new CD starts playing.
Press x.
Pause
Press CD NX (or X on the
remote). Press again to resume
play.
Stop play
Select a track Turn ./> clockwise (to go
forward) or counterclockwise (to
go back) and release it when you
locate the desired track (or press
. or > on the remote).
Remove a CD
Press one of CD 1 – 3 Z to open
the tray that contains the CD you
want to remove.
Play repeatedly
(Repeat Play)
Other Operations
To Do this