Filter
Top Products
22
Making a space between
tracks 3 seconds long
— Smart Space
The Smart Space function lets you make the
blank spaces between tracks 3 seconds long
automatically while making a digital recording
from a CD. For other types of recording, if the
Smart Space function is on and there is no
sound input for about 3 seconds or more (but
less than 30 seconds) while recording, the MD
deck replaces this silence with a blank of about
3 seconds and continues recording.
No sound input for less than 30 seconds
Recording tips (continued)
Off
On
Replaced with a blank of 3 seconds and
recording continues
Auto Cut: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the MD deck replaces this silence with a
blank of about 3 seconds and enters recording
pause.
No sound input for 30 seconds or more
Off
On
To change the trigger level for Level
Synchro Recording
Perform the following procedure to change the
signal level that triggers Level Synchro
Recording.
1 Press FUNCTION repeatedly to switch the
function to MD.
2 Press MENU/NO.
3 Turn ./> (or press . or > on
the remote) until “Setup ?” appears, then
press ENTER/YES.
4 Turn ./> (or press . or > on
the remote) until “LS(T)” appears, then
press ENTER/YES.
5 Turn ./> (or press . or > on
the remote) to select the level, then press
ENTER/YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps. When you
press CLEAR on the remote, the volume
returns to the factory setting (–50 dB).
6 Press MENU/NO.
Marking track numbers at a specific
point during recording
— Track Mark
You can mark track numbers at any time during
recording, regardless of the type of sound
source.
Press MD REC during recording at the
point you want to add a track mark.
The tracks following the added one are
renumbered.
Replaced with a blank of 3 seconds and
recording pauses