Filter
Top Products
31
MD – Editing
4 Turn ./> (or press . or > on
the remote) until the first track number
of the two to be combined appears,
then press ENTER/YES.
5 Turn ./> (or press . or > on
the remote) until the second track
number of the two to be combined
appears.
6 Press ENTER/YES.
“Complete!” appears.
Note
If both of the combined tracks have track titles, the
title of the second track is erased.
Undoing the last edit
— Undo Function
You can use this function to cancel the last edit
and restore the contents of the MD to the
condition before the edit.
Note, however, that you cannot undo an edit if
you do any of the following after the edit:
• Do another edit.
• Start recording.
• Update the TOC by turning off the system or
ejecting the MD.
• Disconnect the mains lead.
You cannot undo the S.F Edit Function even if
you use the Undo Function.
1 Press MENU/NO in stop mode to
display “Edit Menu”.
2 Turn ./> (or press . or > on
the remote) until “Undo ?” appears.
“Undo ?” does not appear, when there is no
editing function that can be cancelled.
3 Press ENTER/YES.
A message appears.
4 Press ENTER/YES again.
“Complete!” appears.