Filter
Top Products
13
CD
Erasing a disc title
1 Press MENU/NO in stop mode.
2 Turn ./> (or press . or > on
the remote) until “Name Erase ?” appears,
then press ENTER/YES.
3 Turn ./> (or press . or > on
the remote) to select the disc title you want
to erase.
The disc title appears scrolling in the display.
“No Name” appears if no disc title is
labelled.
4 Press ENTER/YES again.
“Complete!” appears.
To erase all disc titles, press . or >
repeatedly until “All Erase?” appears in step 2,
then press ENTER/YES twice.
To cancel erasing
Press MENU/NO during steps 1 to 3.
Note
To ensure that disc titles are not erased from memory,
have the system connected to mains power at least
once a month.
6 Press M.
The character you selected in step 4 stops
flashing and the cursor shifts to the right.
7 Repeat steps 4 and 5 to complete the
entire title.
If you made a mistake
Press m or M until the character you
want to change flashes, then repeat steps 4
and 5.
To erase a character
Press m or M until the cursor shifts to
the character you want to erase, then press
CLEAR on the remote while the character is
flashing. You cannot insert characters.
8 Press ENTER/YES to complete the
labelling procedure.
To cancel labelling
Press MENU/NO.
Checking the disc titles
1 Press MENU/NO in stop mode.
2 Turn ./> (or press . or > on
the remote) until “Name Check ?” appears,
then press ENTER/YES.
3 Turn ./> (or press . or > on
the remote) to select the disc titles stored in
the system memory between 01 and 50.
To check the current disc title
Press SCROLL on the remote in stop mode.