Filter
Top Products
29
MD – Editing
Moving recorded tracks
— Move Function
You can use this function to change the order
of any track on the disc. When you move
tracks, the tracks are automatically
renumbered.
E.g.: Moving track 3 to position 2.
123
1
23
4
4
AB C D
CBDA
Dividing recorded tracks
— Divide Function
You can use this function to mark track
numbers after recording. The total number of
tracks increases by one and all the tracks
following the divided ones are renumbered.
E.g.: Dividing track 2 into two tracks.
12 3
123 4
A
AB C D
CBD
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO to display “Edit
Menu”.
3 Turn ./> (or press . or > on
the remote) until “Move ?” appears,
then press ENTER/YES.
4 Turn ./> (or press . or > on
the remote) until the desired track
number to move appears, then press
ENTER/YES.
5 Turn ./> (or press . or > on
the remote) until the new track position
appears.
Original track number
New track position
6 Press ENTER/YES.
“Complete!” appears.
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO to display “Edit
Menu”.
3 Turn ./> (or press . or > on
the remote) until “Divide ?” appears,
then press ENTER/YES.
4 Turn ./> (or press . or > on
the remote) until the desired track
number to divide appears, then press
ENTER/YES.
“Rehearsal” appears and the portion to be
divided is played repeatedly.
5 While monitoring the sound, turn
./> (or press . or > on the
remote) to adjust the point to be
divided.
You can shift the point by 1/86 second
(1 frame) intervals.
To shift the point by second or minute
intervals, press m or M so that “s” or
“m” flashes, then turn ./> (or press
. or > on the remote).
6 Press ENTER/YES.
“Complete!” appears.
continued
Track
number
Original
tracks
After
MOVE
Track
number
Original
tracks
After
DIVIDE
Divide track 2 into
track B and C