Filter
Top Products
15
MD – Play
Programming MD tracks
— Programme Play
You can make a programme of up to 25 tracks.
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press PLAY MODE/DIRECTION
repeatedly until “PGM” appears in stop
mode.
3 Turn ./> (or press . or > on
the remote) until the desired track
appears.
Playing time of the selected track
Selected track number
4 Press ENTER/YES.
The track is programmed.
“STEP” appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time
of the programme.
Total playing time
Last programmed track number
Perform steps 3 and 4.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD NX.
•“- -.- -” appears when the total MD programme time
exceeds 200 minutes.
Press PLAY MODE/DIRECTION
repeatedly until “PGM” and
“SHUFFLE” disappear.
Press CHECK on the remote
repeatedly in stop mode. After the
last track, “Check End” appears.
Press CLEAR on the remote in
stop mode.
Check the
programme
Clear a track
from the end
Press CHECK on the remote
repeatedly in stop mode until the
number of the track to be erased
lights up, then press CLEAR.
Cancel
Programme Play
Clear a specific
track
Add a track to
the programme
in stop mode
5 To programme additional tracks, repeat
steps 3 and 4.
6 Press MD NX (or N on the remote).
To Do this