Filter
Top Products
35
Tuner
Listening to the radio
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 34).
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Turn ./> (or press . or > on
the remote) to select the desired preset
station (or station name* or RDS
station name**).
* The station name appears only if you have
labelled the station (see “Labelling the preset
stations” on the next page).
**European model only.
To Do this
Tips
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial.
• When an FM stereo programme has static noise,
press STEREO/MONO repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
Turn off the radio Press ?/1.
Change the display Press DISPLAY repeatedly.
The display changes cyclically
as follows:
Frequency with station name*
t Clock display t Effect
name
* The station name appears when you label the preset
station (see “Labelling the preset stations” on the
next page) or the RDS broadcast is received (see
“Using the Radio Data System (RDS)” on the next
page).
Listening to non-preset radio
stations
• Press m or M in step 2. “MANUAL”
appears. Then press m or M to tune in
the desired station (Manual Tuning).
• Press and hold m or M until “AUTO”
appears in step 2. The frequency indication
changes and the scanning stops when the
system tunes in a station (Automatic
Tuning).
To cancel Automatic Tuning
Press m or M.