Filter
Top Products
33
MD – Editing
Fade-in and Fade-out
Recording
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO to display “Edit
Menu”.
3 Turn ./> (or press . or > on
the remote) until “S.F Edit?” appears,
then press ENTER/YES.
4 Turn ./> (or press . or > on
the remote) until “Fade In?” or “Fade
Out?” appears, then press ENTER/YES.
5 Turn ./> (or press . or > on
the remote) until the track number you
want to change the recording level
appears, then press ENTER/YES.
“Time 5.0s” appears in the display.
6 Turn ./> (or press . or > on
the remote) to change the Fade-in or
Fade-out recording time.
The system plays the portion that will be
recorded over using Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 12.5 seconds,
in 0.1 second steps. You cannot set the time
longer than the track.
7 Press ENTER/YES.
“S.F Edit OK?” appears in the display.
8 Press ENTER/YES again.
The deck starts recording over the existing
track. “S.F Edit: ** %” appears while the
track is being recorded. When the recording
finishes, “Complete!” appears in the display
for a few seconds.
Notes
• Do not disconnect the mains lead or move the
system while recording is in progress. This may
damage the recording data preventing recording
from being performed properly.
• Do not use an MD that is damaged or dirty. This
may prevent recording data from being recorded
properly.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it returned to the original level.
• The recording level cannot be changed while the
timer is activated.