Filter
Top Products
23
MD – Recording
Turn on the Smart
Space function
S.Space On
(factory setting)
Turn off the Smart
Space function
S.Space Off
6 Press MENU/NO.
To continue and record, follow the
procedures described on the various
recording pages.
1 Press MD REC to stand by for
recording.
2 Press MENU/NO.
3 Turn ./> (or press . or > on
the remote) until “Setup ?” appears,
then press ENTER/YES.
4 Turn ./> (or press . or > on
the remote) until “S.Space Off” (or
“S.Space On”) appears, then press
ENTER/YES.
5 Turn ./> (or press . or > on
the remote) to select the setting, then
press ENTER/YES.
To Select
Adjusting the recording level
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when
making an analogue recording, but also when
making a digital recording from a CD, etc.
1 Prepare the desired sound source to
record and start play.
2 Confirm that the MD deck is in
recording standby. If not, press MD
REC.
3 Press MENU/NO.
4 Turn ./> (or press . or > on
the remote) until “Setup ?” appears,
then press ENTER/YES.
5 Turn ./> (or press . or > on
the remote) until “Level Adjust ?”
appears, then press ENTER/YES.
6 Turn ./> (or press . or > on
the remote) to adjust the recording
level.
The recording level can be adjusted from
–∞ to +18, in 0.1 dB steps. While
monitoring the sound, adjust to the optimum
level while making sure that “OVER” does
not appear in the display at the loudest
portion.
7 Press ENTER/YES.
8 Press MENU/NO.
9 Press x.
10
When a CD or other sound source is
playing, stop playback.
To continue and record, follow the
procedures described on the various
recording pages.
Tips
• You can adjust the recording level in 1 dB step by
pressing m or M.
• You can also adjust the recording level during
recording.
• Once adjusted, the recording level is maintained
until you adjust it again.