Filter
Top Products
97
4-7 SET UP Menu
Chapter 4 Menu Settings
4-7 SET UP Menu
In the SET UP menu, you can store and recall menu
settings to and from the VTR memory banks and memory
stick, register items to the PF menu, and set items in the
VTR SETUP menu and PANEL SETUP menu.
For details on storing and recalling data to or from the
VTR memory banks or memory stick, and registering items
to the PF menus, see “4-1 Registering and Storing Menu
Settings” on page 37.
To activate the SET UP menu
Press the SET UP button.
To change the SET UP menu page
Press the ALT button.
Selecting remote operation mode
When operating the VTR with an external device, set the
ALT/[F7] (REMOTE NET) buttons, ALT/[F8] (REMOTE
9-PIN) buttons or ALT/[F9] (REMOTE 50-PIN) buttons to
“on”.
When the ALT/[F7] (REMOTE NET) buttons are set
to “on”
You can operate the VTR from a computer or similar
through the network to which the ETHERNET connector
is connected.
Button Indication Function Settings
[F1] VTR BANK See “4-1-4 VTR Memory Bank Function” on page 39.
[F2] MEMORY CARD See “4-1-5 Memory Stick Operations” on page 41.
[F4] PF ASSIGN See “4-1-3 Registering Items to the VTR SETUP Menu” on page 38.
[F5] PANEL SETUP See “4-7-2 PANEL SETUP Menu” on page 100.
[F6] VTR SETUP See “4-7-1 VTR SETUP Menu” on page 98.
ALT/[F1] DEFAULT VTR
BANK
See “4-1-10 Saving and Recalling DEFAULT Settings on a Bank” on
page 48.
ALT/[F2] DEFAULT
MEMORY CARD
See “4-1-11 Saving and Recalling DEFAULT Settings in a “Memory Stick””
on page 48.
ALT/[F7] REMOTE NET Selects access from the ETHERNET connector. on, off
ALT/[F8] REMOTE 9-PIN Selects remote operation using a device connected to the REMOTE 1-
IN(9P) or REMOTE 1-I/O(9P) connector.
on, off
ALT/[F9] REMOTE 50-PIN Selects remote operation using a device connected to the REMOTE 2
PARALLEL I/O(50P) connector.
on, off
VTR
BANK
MEMORY
CARD
PF
ASSIGN
PANEL
SETUP
VTR
SETUP
[F1]VTR BANK: Copy data between
current setup and 8 banks.
[F2]MEMORY CARD: Copy data
between VTR and memory card.
[F4]PF1&2 ASSIGN: Assign PF1/PF2
menu function keys.
[F5]PANEL SETUP; Panel setting
[F6]VTR SETUP; VTR current setup
“V” indicates that more than one menu page exists.