Filter
Top Products
49
4-1 Registering and Storing Menu Settings
Chapter 4 Menu Settings
4
Press the [F2] (DEFAULT MEMORY CARD) button.
The DEFAULT MEMORY CARD screen appears.
The procedure for saving from CARD DEFAULT to
DEFAULT BANK or CURRENT DEFAULT, saving
from DEFAULT BANK, CURRENT DEFAULT or
FACTORY PRESET to CARD DEFAULT, changing
the title, or setting protection, is the same as operation
on a VTR bank.
For details, see “4-1-5 Memory Stick Operations” on
page 41.
Notes
• The storage region for CARD DEFAULT is one set
only.
• The title shown in the current area is always that for
the CURRENT SETUP data. When CARD
DEFAULT data with the title changed is written to
CURRENT DEFAULT, the title of the current area
does not change. Also, when CURRENT
DEFAULT settings are saved in DEFAULT BANK,
the title of DEFAULT BANK is copied from the title
of CURRENT SETUP.
• There is complete data compatibility between the
SRW-5000 and SRW-5500.
On how to check the items for which DEFAULT values
have been changed from FACTORY PRESET values,
see “To check the items for which DEFAULT values
have been changed” on page 100.
UNDO
DIREC-
TION
B
COPY EXITEDIT
TITLE
MEMORY CARD
(Untitled)
VTR BANK
C (Preset)
CARD DEFAULT DEFAULT BANK 1
B
1 (Untitled)
F (Preset)