Filter
Top Products
64
4-3 TC Menu
Chapter 4 Menu Settings
4-3-10 Displaying the Pulldown Time
Code (PDTC DISP) (when HKSR-
5001 is installed)
To display the pulldown time code, follow the steps below.
1
Press the TC button, then press the ALT button.
The ALT+TC menu appears.
2
Press the [F4] (PDTC DISP) button to select
(highlight) “on”.
Each time you press the button, “on” and “off”
alternate.
on: Displays the pulldown time code.
off: Does not display the pulldown time code.
4-3-11 Superimposition of Character
Information (PD CHARA/CHARA
SUPER/H-POS/V-POS)
To superimpose the characters representing time code data
and operation mode information on the output signals, use
the ALT/[F4] (PD CHARA) and ALT/[F6] (CHARA
SUPER) buttons.
Contents of superimposed data
The example above shows the factory-set contents of data.
By changing the setting of the VTR SETUP menu item 626
“DISPLAY INFORMATION select”, different types of
information can also be displayed on the second line.
a Types of time data
TCCONV
MENU
on
ORG TC
DISP
on
START
TC ENT
JUMP
TC SEL
-3H
EXITSTART
TC PST
STILL
SET 01 00 00 00
SS
HDCAM-SR
REMAIN:01H06M
! ALT+TC
00H 00M 00S 00F
STARTING TC
03H 00M 00S 00F
JUMPING TC
00H 00M 00S 00F
CURRENT TC
2 1
TAPE
TIMER
12H
PDPSET
MENU
-
TC
CONV
off
PDTC
DISP
off
PD
CHARA
off
CHARA
H-POS
10
CHARA
V-POS
10
VITC
POS-1
16
VITC
POS-2
16
CHARA
SUPER
off
00H 00M 00S 00F
00H 00M 00S 00F
AIN 00:01:10:00 AOUT 00:02:10:00
IN 00:01:20:00 OUT 00:02:20:00
INTRP DF F2
INTRP DF 2FO F2
LTC
TCR
2FD
LTC
TCR
PLAY LOCK
Button Setting Connector to which the characters
are superimposed
ALT/[F4] on FORMAT CONV. OUT connector (on
two connectors)
ALT/[F6] on • MONITOR connector of HD SDI
OUTPUT
• SD OUT COMPOSITE (MONITOR)
connector
• MONITOR connector of SD SDI
OUT
Note
Symbol
Meaning
CTL CTL counter data
TCR LTC reader time code data
UBR LTC reader user bit data
TCR. VITC reader time code data
T CR.23:59.40.18
*
SHUTTL
E
STI LL
1 Types of time data
Time data
2 Drop frame mark of the
time code reader
3 Drop frame mark of the
time code generator
4 Field mark of the
VITC data
5 Operation mode