Filter
Top Products
107
5-3 Preparing for Playback
Chapter 5 Recording/Playback
5-3 Preparing for Playback
5-3-1 Setting Switches and Menus
Before starting playback, set the switches and menus as
shown in the diagram below.
For details, see the pages indicated in the parentheses.
5-3-2 Adjusting the Audio Playback
Level
1
Press the PB LEVEL button at the upper left of the
control panel to enter the PB LEVEL adjustment
mode.
A vertical blue line appears at the right of the audio
level meter for each channel, indicating the PB
LEVEL adjustment mode.
2
Press the button for the channel for which you want to
carry out the adjustment (common with MONITOR
R), to make the channel active.
An orange border appears around the audio level
meter, indicating that it is active.
3
Make the adjustment, using the MULTI CONTROL
knob or cursor buttons.
To escape from the PB LEVEL adjustment mode
Press the PB LEVEL button at the upper left of the control
panel once more. The vertical blue line at the right of the
audio level meter for each channel disappears or turns
white.
To output at the preset level (for a level recorded
at reference 0 dB, outputting at +4 dBm)
In the PB LEVEL adjustment mode, make the channel
active, then press the MULTI CONTROL knob. The
setting becomes the preset value. Press once more to return
to the immediately previous value. Pressing once more
again to return to the preset value. You can also return to
the preset value with the cursor center button. When you
exit the PB LEVEL adjustment mode, a vertical white line
on the right of the audio level meter is not displayed.
For details on changing the factory-set reference output
level, refer to the Installation Manual.
SRW-5000
HD DIGITAL VIDEO CASSETTE RECORDER
MONITOR SELECT buttons: Audio
channels to be monitored (page 103)
POWER switch: ON
PB level controls:
Playback level
Menu settings
[F1] (TIMER SEL) button in the TC menu: Select the time data to be displayed.
REMOTE buttons: None of
these buttons light up.