Filter
Top Products
145
Menu List
Appendix
Items Relating to Operation Panels (Nos. 101 to ...)
019 AUTO EJECT
LEVEL2
(HDCAM)
[off]
LEVEL1
LEVEL2
LEVEL3
Selects the tape conditions under which a cassette is
automatically ejected in playback (after approx. 3 seconds
playback).
When the cassette is automatically ejected, a warning
message “17 PB FREQUENCY IS UNSUITABLE” appears.
off: The cassette is not ejected.
LEVEL1: When a tape without audio playback compatibility
is played back, the cassette is automatically ejected.
There is no playback compatibility between playback frame
rates of 24, 25 fps and 30 fps. (There is compatibility
for PsF, interlacing, or 0.1% discrepancy.)
LEVEL2: Excluding a tape with compatibility for a
frequency discrepancy of 0.1%, when a tape without
compatibility is played back, the cassette is
automatically ejected.
LEVEL3: When a tape other than in the mode selected as
the system is played back, the cassette is automatically
ejected. (This includes PsF, and interlace mode
differences.)
020 P PLAY [off]
on
Selects the mode for output of program play video and
audio from the FC OUT connectors.
off: Use the normal mode.
on: Program play video and audio is output.
Item number Item Setting Function
Item number Item Setting Function
101 SELECTION FOR
SEARCH DIAL
ENABLE
dial direct
[via search key]
Determines how the unit is set to search mode.
dial direct: The unit enters search mode when you rotate
the search dial in all modes except recording and edit
modes.
via search key: The unit enters search mode when you
press the SHUTTLE, JOG or VAR button.
102 REFERENCE
SYSTEM ALARM
off
[on]
Specifies where or not to display a warning when audio/
video reference signal selected in item 005 is not present or
out of phase with the input video signal.
off: No warning is displayed.
on: Warning is displayed by flashing STOP button.
104 REC INHIBIT
LAMP FLASHING
off
[on]
Specifies whether the REC INHIBIT indicator lights or
flashes, when record-protect plug on the back side of the
inserted cassette tape is pressed down.
off:The REC INHIBIT indicator lights up.
on:The REC INHIBIT indicator flashes.