Filter
Top Products
136
Error Messages and Warning Messages
Appendix
To clear a warning message
To cancel the display of a warning message, see “Clearing
warning messages” on page 138.
Item number Display Meaning
01 NO EXTERNAL REFERENCE There is no reference signal on the selected REF. INPUT
connector. The VTR is using an internal reference signal.
02 LOST LOCK Capstan servo lock was lost during playback, recording, or editing.
03 NO EXTERNAL REFERENCE ON
FC
When the VTR SETUP menu item A05 “PD EXT SD REF LOCK
MODE” is set to “lock1” or “lock2”, no external SD reference signal
is input.
04 HD & SD REF ASYNCHRONOUS When the VTR SETUP menu item A05 “PD EXT SD REF LOCK
MODE” in is set to “lock1” or “lock2”, HD reference signal and
external SD reference signal are not synchronized.
05 PLL UNLOCK ON FC The PLL of the HKSR-5001 is not locked on the reference signal.
08 NO SDI INPUT An SDI input signal cannot be detected.
0B VIDEO DATA ERROR The video data channel condition indicator is lit red.
0F AUDIO DATA ERROR The audio data channel condition indicator is lit red.
10 VITC NOT READ VITC cannot be correctly read from the tape.
11 AUDIO PLL UNLOCKED Audio lock generator PLL not locked to the video reference signal.
14 NO PB RF SIGNAL Playback heads cannot correctly read digital data from the tape.
15 INCONSISTENT EMPHASIS Emphasis information on the tape is inconsistent with the system
emphasis status.
16 INCONSISTENT FORMAT OF META
DATA
The meta data being input and the meta data recorded on the tape
have different formats.
17 PB FREQUENCY IS UNSUITABLE The cassette is ejected automatically in line with the setting of the
VTR SETUP menu item 018 “AUTO EJECT LEVEL” because the
system frequency of the VTR and the frequency of the signal
recorded on the tape do not match.
19 NO A1/A2 INPUT No carrier detected on digital audio input on channels 1 and 2
1A NO A3/A4 INPUT No carrier detected on digital audio input on channels 3 and 4
1B NO A5/A6 INPUT No carrier detected on digital audio input on channels 5 and 6.
1C NO A7/A8 INPUT No carrier detected on digital audio input on channels 7 and 8.
1D NO A9/A10 INPUT No carrier detected on digital audio input on channels 9 and 10.
1E NO A11/A12 INPUT No carrier detected on digital audio input on channels 11 and 12.
21 REC INHIBIT MODE The menu settings are to a mode inhibiting recording, or the tape
format does not allow recording.
22 CASSETTE REC INHIBIT The cassette is set to inhibit recording.
Warning message
PRESET
MODE
24F
DF
RDTIME
SET
EXITPDTC
DF/NDF
DF
MAINTENANCE INFOMATION DISPLAY
SS
OPERATION
DRUM RUNNING
THREADING
TAPE TRAVEL
529HOURS
34HOURS
20HOURS
780TIMES
[ 26H]
[ 16H]
[ 449H]
STILL
! CUE
WARNING - 08
NO SDI INPUT
Total 8 message
Warning mark