Filter
Top Products
99
System Menu
Chapter 6 Menus
BLANK LINE [> Blank
Line]: Switch blanking of
the video output signal in
the vertical blanking
interval on or off. Lines in
the vertical blanking
interval can be set
separately The Y/C
signal and odd/even
fields are blanked
simultaneously.
ALL LINE [>> All line] *- - - [>>> - - -]: Specify the blanking for each line separately.
BLANK [>>> Blank]: Regardless of the setting of other sub-
items, blank all lines which can be specified in this menu
item.
THROUGH [>>> Through]: Regardless of the setting of other
sub-items, switch off blanking for all lines which can be
specified in this menu item.
When the
system
frequency is 60I
or 30P
(SYSTEM SEL
>UC/J SELECT
in the setup
menu is set to
“UC”)
LINE12
[>> Line 12]
|
LINE19
[>> Line 19]
Specify blanking for lines 12 to 19.
*BLANK [>>> Blank]: Carry out blanking.
THROUGH [>>> Through]: Switch off blanking.
LINE20
[>> Line 20]
Specify blanking for line 20.
*BLANK [>>> Blank]: Carry out blanking.
HALF [>>> Half]: Carry out half-blanking.
THROUGH [>>> Through]: Switch off blanking.
When the
system
frequency is 60I
or 30P
(SYSTEM SEL
>UC/J SELECT
in the setup
menu is set to
“J”)
LINE12
[>> Line 12]
|
LINE20
[>> Line 20]
Specify blanking for lines 12 to 20.
*BLANK [>>> Blank]: Carry out blanking.
THROUGH [>>> Through]: Switch off blanking.
LINE21
[>> Line 21]
Specify blanking for line 21.
*BLANK [>>> Blank]: Carry out blanking.
HALF [>>> Half]: Carry out half-blanking.
THROUGH [>>> Through]: Switch off blanking.
When the
system
frequency is 50I
or 25P
LINE9
[>> Line 9]
|
LINE22
[>> Line 22]
Specify blanking for lines 9 to 22.
*BLANK [>>> Blank]: Carry out blanking.
THROUGH [>>> Through]: Switch off blanking.
LINE23
[>> Line 23]
Specify blanking for line 23.
*HALF [>>> Half]: Carry out half-blanking.
THROUGH [>>> Through]: Switch off blanking.
REFERENCE SEL [> Ref Select]: Specify the signal to which
the unit synchronizes during playback, when sync signals
are input to both the HDSDI INPUT connector and the
REF VIDEO INPUT connector.
AUTO [>> Auto]:
Synchronize to the REF VIDEO input.
*INPUT [>> Input]: Synchronize to the HDSDI input.
SETUP ADD [> Setup add]: Select whether to add black
setup to the composite video output signal.
*OFF [>> OFF]: Do not add setup.
ON (ADD) [>> ON]: Add setup.
CC (F1) BLANK [> CC1 blank]: Select whether to suppress
the closed caption signal to be superimposed on the 1st
field of the output video signal.
Note
When you play back a disc with a recorded closed caption
signal, the closed caption signal is multiplexed into SDSDI and
composite output only.
*OFF [>> OFF]: Suppress.
ON [>> ON]: Do not suppress.
CC (F2) BLANK [> CC2 blank]: Select whether to suppress
the closed caption signal to be superimposed on the 2nd
field of the output video signal.
Note
When you play back a disc with a recorded closed caption
signal, the closed caption signal is multiplexed into SDSDI and
composite output only.
*OFF [>> OFF]: Suppress.
ON [>> ON]: Do not suppress.
VIDEO CONTROL [Video]: Settings related to video
control
Description