Sharp MD-X8 Stereo System User Manual


 
8
DISPLAY SECTION
WWW 3 FOR EVERWWWWWWWW
WWW 2WAVEWWWWWWWWWWWW
WWW 1 LOVE SONGWWWWWWW
BEST HI TSWWWWWWW
TOTAL
MD 1 2WWW 55:08
MDWWW 12WWW55:08WTOTAL
BESTWHITS
Lighten
Darken
Lighten
Darken
Standard character display
Extra large character display
DISPLAY
MULTI CONTROL
MIN.WWWWWWWWWWWWWMAX .
WWWWWWWWWWWWWWWWWWWWW
WWWWWWWWWWWWWWWWWWWWW
WWWCONTRASTWADJUSTWWW
DISPLAY
HH
HH
H To change the contrast of the display
1 Turn the power on, and hold down the DISPLAY button for
more than 0.5 seconds.
2 Press the MULTI CONTROL button to change the contrast.
I The contrast is adjustable in 16 steps.
I If no operation is performed for 10 seconds or more, the unit will return
to the original screen.
I If you operate your personal computer using a separately available
sound card, you cannot adjust the contrast.
HH
HH
H Character display
You can select a standard character display or an extra large
character display for the display on this product.
I Standard character display
The default display mode set at the factory.
Track names are displayed on 4 lines so that you can check several
track names at the same time.
I Extra large character display
When track names are displayed using extra large characters, you
can read the names at a distance.
HH
HH
H To change the size of the characters
(extra large character display)
Turn the power on while the MD is in the stop mode, and press
the DISPLAY button.
I If the DISPLAY button is pressed again, the characters will return to
their original size.
*01-16 98.6.23, 10:29 AM8