Filter
Top Products
40
(Continued)
ENTER
TIMER/
DELETE
MULTI CONTROL
2
3
4
5
6
7
8
WWWWWADJUSTWW
WLEEPWSETWWWW
WWWWWWSETWWWW
WWWWWWSTANDBY
T
IMER
WWWWWWWW
T
T
S
WWWWWIMERT
TIMEWR
WWVOLUMEWWW3WWWWWWWWW
WWSOURCEWWTUNERWP-01W
WWOFFWWWWWamW7:40WWWW
WWONWWWWWWamW6:30WWWW
WWTIMERWWWRECYWWWWWWW
WWVOLUMEWWW3WWWWWWWWW
WWSOURCEWWTUNERWP-01W
WWOFFWWWWWamW7:40WWWW
WWONWWWWWWpmW2:30WWWW
WWTIMERWWWRECYWWWWWWW
WWVOLUMEWWW3WWWWWWWWW
WWSOURCEWWTUNERWP-01W
WWOFFWWWWWamW7:40WWWW
WWONWWWWWWpmW2:30WWWW
WWTIMERWWWRECYWWWWWWW
WWVOLUMEWWW3WWWWWWWWW
WWSOURCEWWTUNERWP-01W
WWOFFWWWWWpmW3:50WWWW
WWONWWWWWWpmW2:30WWWW
WWTIMERWWWRECYWWWWWWW
WWVOLUMEWWW3WWWWWWWWW
WWSOURCEWWTUNERWP-01W
WWOFFWWWWWpmW3:50WWWW
WWONWWWWWWpmW2:30WWWW
WWTIMERWWWRECYWWWWWWW
WWVOLUMEWWW0WWWWWWWWW
WWSOURCEWWTUNERWP-01W
WWOFFWWWWWpmW3:50WWWW
WWONWWWWWWpmW2:30WWWW
WWTIMERWWWRECYWWWWWWW
WWVOLUMEWWW3WWWWWWWWW
WWSOURCEWWMDNERWP- 01W
WWOFFWWWWWamW7:40WWWW
WWONWWWWWWamW6:30WWWW
WWTIMERWWWPLAYWWWWWWW
HH
HH
H To set up the timer for recording
1 While in the stop mode, press the TIMER/DELETE button.
2 Within 10 seconds, press the or on the MULTI CONTROL
button to select "TIMER SET". Then, press the ENTER button.
3 Within 10 seconds, press the or on the MULTI CONTROL
button to select "REC".
I Each time the button is pressed, the display will alternate between
"PLAY" and "REC".
I If a radio station has been stored in memory when "REC" is selected,
"TUNER P-01" will appear automatically as the SOURCE setting.
4 Within 10 seconds, press the on the MULTI CONTROL
button to select the position where the start time hour ("ON")
flashes. Then, press the
or on the MULTI CONTROL
button to adjust the hour.
5 Press the on the MULTI CONTROL button to select the
position where the start time minutes flash. Then, press the
or on the MULTI CONTROL button to adjust the minutes.
I When the button is held down, the time will change in increments of
5 minutes.
6 Adjust the hour and minute for the stop time ( "OFF") using the
same procedure as described in steps 5 - 8 above.
7 Press the or on the MULTI CONTROL button to select
the position where the sound source flashes. Then, press the
or on the MULTI CONTROL button to select the sound
source you want to record from.
I If no radio stations have been stored in memory, "TUNER" will not
appear.When "TUNER" has been selected:
I "P-01" will appear to the right of "TUNER". After pressing the on
the MULTI CONTROL button (the flashing area moves), press the
or on the MULTI CONTROL button to select the location number
of the radio station you want to record from.
8 Press the on the MULTI CONTROL button to select the
VOLUME position on the LCD. The current volume level (0 -
10) will flash. Then, press the
or on the MULTI CONTROL
button to adjust the volume level (0 - 10) as required.
I When the preset time is reached, the volume will increase gradually
up to the preset volume level.
9 After making all required settings, press the ENTER button.
I The timer recording settings are now complete. These settings will be
stored in memory until changed. Then, set all items as required. For
details on settings, see "Performing timer recording" on page 41.
Stopping timer recording in the middle:
Press any button other than the MULTI CONTROL button or the
ENTER button.
38-58 98.6.23, 10:33 AM40