19
HH
HH
H Tuning
1 Press the TUNER (BAND) button.
I The power is turned on, and the tuner is selected.
2 Press the TUNER (BAND) button to select the desired fre-
quency band (FM or AM) .
3 Tune in to the desired station using the 3 TUNING/CUR-
SOR 2 button.
Auto tuning:
When the 3 TUNING/CURSOR 2 button is pressed for more
than 0.5 seconds and then released, the tuning stops at the first
receivable broadcast station.
Notes:
I When radio interference occurs during auto tuning, auto tuning may
stop automatically at that point.
I If a weak station signal is found during auto tuning, the station will be
skipped.
I To stop auto tuning, press the 3 TUNING/CURSOR 2 button
again.
Manual tuning:
Press the 3 TUNING/CURSOR 2 button as many times as
necessary to adjust the frequency display to the frequency of the
desired station.
4 To receive FM stereo, press the ST button on the remote
control so that the "FM ST" indicator appears.
I “j” will appear when an FM broadcast is in stereo.
5 If the FM stereo reception is weak, press the ST button so that
the “FM ST” indicator goes out.
I Although the reception changes to monaural, the sound becomes
clearer.
After use:
Press the POWER button to turn the power off.
Direct playback:
Just pressing the TUNER (BAND) button will turn on the
power automatically. The radio station you were listening to
last will be tuned in.
Notes:
I The memory recalls the last station received even after changing the
TUNER (BAND) button or function selector buttons, or pressing the
POWER button to turn the power off.
I If you are listening to the radio near personal computers, radios, or TV
sets, various noise or interference may be heard. Keep this unit as far
away as possible from these products.
RADIO OPERATION
FM stereo
indicator
Frequency FM stereo
reception indicator
W - WWWWWW
-12
WWW
-4
WWWW
0
W> W
RWWWWWWWWWWWWWWWWWWWW
LWWWWWWWWWWWWWWWWWWWW
W - WWWWWW
-12
WWW
-4
WWWW
0
W> W
FMWSTWWWW 87.5WMHzWWWW
T
U
N
I
N
G
/
C
U
R
S
O
R
TUNING/CURSOR
TUNER
(BAND)
ST
BAND
TUNER
*17-21 98.6.23, 0:11 PM19