Filter
Top Products
10
SETTING THE CLOCK
When you have set the date and time, this unit can be used
as a clock. It can be used for timer recording or for timer
playback. It is also used to store the MD recording date in
memory.
1 Turn the power on.
2 Press the TIMER/DELETE button.
3 Within 10 seconds, press the or on the MULTI CONTROL
button to select TIME ADJUST.
4 Within 10 seconds, press the ENTER button.
I The unit will enter the date setting mode.
5 Press the 1 or 0 on the MULTI CONTROL button to adjust
the year.
I Press the button once to increase or decrease the year by one. Keep
pressing it to advance continuously.
I For any year after 2000, use "00" for 2000, "01" for 2001, and so on.
6 Press the on the MULTI CONTROL button to select the
month.
7 Press the or on the MULTI CONTROL button to adjust the
month.
8 Press the on the MULTI CONTROL button to select the day.
9 Press the or on the MULTI CONTROL button to adjust the
day.
10
Press the on the MULTI CONTROL button to select the
hour.
11
Press the or on the MULTI CONTROL button to adjust the
hour.
I On the display, midnight is shown as "AM 12:00" and noon is shown
as "PM 12:00". When setting the time, be careful to set AM or PM
according to the current time.
12
Press the on the MULTI CONTROL button to select the
minute.
13
Press the or on the MULTI CONTROL button to adjust the
minute.
14
Press the ENTER button to start the clock at the top of the
minute.
I The clock starts operating.
Notes:
I In the event of a power failure or when the AC power cord is
disconnected, the clock setting will be lost. Reset the time.
I While recording an MD, you cannot set the date and clock. Be sure
to set the date and clock before recording.
I The range of dates that can be entered is from July 1, 1997 to
December 31, 2049.
To change the setting
I After performing steps 1 - 4 above,
➀ Press the or on the MULTI CONTROL button to select
the item (YEAR, MONTH, DAY or CLOCK) you want to
change.
➁ Press the or on the MULTI CONTROL button to change
the setting.
➂ Press the ENTER button.
To check the time
When the power is off, the time appears on the display.
When the power is on and you press the TIMER/DELETE button,
the time will appear for about 10 seconds on the display.
I The year, month and day will not be displayed.
TIMER/
DELETE
ENTER
MULTI CONTROL
2
3
4
5
6
7
8
9
10
11
12
13
14
TIMEWADJUST
SLEEPWSET
TIMERWSET
TIMEWADJUST
SLEEPWSET
TIMERWSET
CLOCKWWWWWamW0:00
DAYWWWWWWW27WWWWW
MONTHWWWWW 09WWWWW
YEARWWWWW '98WWWWW
C
A
LENDARW&WCLOCK
CLOCKWWWWWamW0:00
DAYWWWWWWW27WWWWW
MONTHWWWWW 09WWWWW
YEARWWWWW '98WWWWW
C
A
LENDARW&WCLOCK
CLOCKWWWWWamW9:00
DAYWWWWWWW27WWWWW
MONTHWWWWW 09WWWWW
YEARWWWWW '98WWWWW
C
A
LENDARW&WCLOCK
CLOCKWWWWWamW9:00
DAYWWWWWWW27WWWWW
MONTHWWWWW 09WWWWW
YEARWWWWW '98WWWWW
C
A
LENDARW&WCLOCK
CLOCKWWWWWamW9:35
DAYWWWWWWW27WWWWW
MONTHWWWW ' 09WWWWW
YEARWWWWW '98WWWWW
C
A
LENDARW&WCLOCK
M
D
LNODDISCWCLOCK
W
W
W
CLOCKWWWWWam :
DAYWWWWWWW01WWWW
MONTHWWWWW 01WWWW
YEARWWWWW '99WWWW
C
A
LENDARW&WCLOCK
0
00
CLOCKWWWWWam :
DAYWWWWWWW01WWWW
MONTHWWWWW 01WWWW
YEARWWWWW '98WWWW
C
A
LENDARW&WCLOCK
0
00
CLOCKWWWWWam :
DAYWWWWWWW01WWWW
MONTHWWWWW 01WWWW
YEARWWWWW '98WWWW
C
A
LENDARW&WCLOCK
0
00
CLOCKWWWWWam :
DAYWWWWWWW01WWWW
MONTHWWWWW 09WWWW
YEARWWWWW '98WWWW
C
A
LENDARW&WCLOCK
0
00
CLOCKWWWWWam :
DAYWWWWWWW01WWWW
MONTHWWWWW 09WWWW
YEARWWWWW '98WWWW
C
A
LENDARW&WCLOCK
0
00
*01-16 98.6.23, 10:29 AM10