Filter
Top Products
55
(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning Remedy
BLANK MD • Nothing is recorded. • Replace the disc with a recorded disc.
Can’t ACCESS • The unit cannot access the personal computer. • Make sure the sound card is plugged in correctly.
• While MD 0 MDEDIT, incorrect digital signals are input • Make sure the personal computer is operating normally.
from the portable MD. • Make sure the cable is connected correctly and the portable MDs power
is on.
Can’t COPY • No copy can be made because of the SCMS copyright system. • Record using the analog cable.
Can’t EDIT • A track cannot be edited. • Change the stop position of the track and then try editing it.
Can’t REC • Recording cannot be performed correctly due to vibration. • Rerecord or replace it.
DEFECT • Since this disc has scratches on it, the recording operation • Replace the disc with another recordable disc.
was skipped.
CH ERROR • The CD changer doesn’t work well. • Turn off the power, and disconnect the AC power cord from
the AC outlet.Then connect the AC power cord, and turn on the power again.
CONNECT ERR • While MD 0MD EDIT, incorrect digital signals are input • Make sure the cable is connected correctly and the portable
from the portable MD player. MD turns on the power.
Din UNLOCK • Incorrect digital signals are input. • Connect correct digital signals.
• Use the analog input jack.
DISC ERR* • The disc is damaged. • Reload the disc or replace it.
• The TOC information is not recorded on the disc.
DISC FULL • The disc is out of recording space. • Replace the disc with another recordable disc.
EDIT OVER • There is no space left for recording CD. • Replace it with another recordable disc.
FOCUS ERROR • A disc has not been loaded. • Reload the MiniDisc.
• The disc data cannot be read.
MD ERROR • Trouble is found. • Contact a Sharp Authorized Servicing Dealer or Sharp
Authorized Service station.
MECHA ERR* • There is a mechanical problem and the disc is not working • Turn off the power, and press the 7 button.
properly.
NAME FULL • The number of characters for the disc name or track name • Shorten the disc or track name.
exceeds 40.
NO DISC • A MiniDisc has not been loaded. • Load a MiniDisc.
• MiniDisc data cannot be read. • Reload the MiniDisc.
NOT AUDIO • The data recorded on this disc is not audio data. • Select another track.
• Replace the MiniDisc.
PLAYBACK MD • You tried to record on a playback-only disc. • Replace it with a recordable MiniDisc.
• The disc and track names cannot be moved on playback discs. • Edit only the sound.
PROTECT • Trouble is found. • Restart the unit. If the unit doesn't work, contact a Sharp
Authorized Servicing Dearer or Sharp Authorized Service station.
PROTECTED • The MiniDisc is write protected. • Move the write protection tab back to its original position.
TEMP OVER • The temperature is too high. • Turn off the power, and wait for a while.
TOC ERR* • The disc has a large amount of damage. • Replace the disc with another disc.
TOC FULL* • There is no space left for recording character information • Replace it with another recordable disc.
(track names, disc names, etc.).
TOC W ERROR • Trouble is found. • Contact a Sharp Authorized Servicing Dealer or Sharp
Authorized Service station.
TRAY ERROR • The disc tray for CD doesn't work well. • Turn off the power, and disconnect the AC power cord from
the AC outlet. Then connect the AC power cord, and turn on
the power again.
U TOC ERR* • The TOC information on this disc does not meet the MD • Replace it with another disc.
specifications or it cannot be read. • Erase all the data, and try recording.
U TOC W ERR • The TOC information could not be created properly due to • Turn off the power, and try to write the TOC again.
a mechanical shock or to scratches on the disc. (Remove any source of shock or vibration while writing.)
? DISC • The data contains an error. • Replace the disc with another disc.
00:00 • Music is not recorded. • Replace the disc with a recorded disc.
* Number or symbol
38-58 98.6.23, 10:34 AM55