Filter
Top Products
30
HH
HH
H Recording from a portable MD player
onto a MiniDisc (MD
00
00
0 MD EDIT)
By connecting a portable MD player which has an MD 0 MD
EDIT function, you can easily record the sound and the
character information at the same time.
1 Connect the unit to a portable MD player.(Page 45).
I Connect the MD IN/AUX1 jack on the main unit to the headphone/
remote control jack on the portable MD player using the proprietary
cable. (AD-M4 AC, available separately ).
2 Load a recordable MiniDisc in the main unit, and load the
MiniDisc you want to record from into the portable MD player.
3 Check the record mode by pressing the REC MODE button on
the remote control.
4 Check the number of recordable tracks and the amount of time
by pressing the MD 0 MD button on the main unit.
I The disc name will be displayed along with the recordable number of
tracks and time. Any extra time on the disc will also be displayed.
5 Press the MD 0 MD button on the main unit.
I If the MiniDisc to be recorded from has track names, "NAME READ-
ING" will flash and then the track names will be lit and recorded.
I If the playback MiniDisc has a disc name, "disc name"will be
displayed and record. After all of the tracks are recorded, the unit will
stop automatically.
To record from a track in the middle of an MD to the last
track on the disc:
Select the track number to start recording from, after performing step 4.
Then press the MD 0 MD button on the main unit.
To record a particular track:
1 Select the track number to record from after performing step
4.
I If you start recording from a track in the middle, or if you only record
a few tracks, the disc name cannot be recorded.
2 Press the TRACK button on the main unit.
3 Press the MD 0 MD button on the main unit.
Notes:
Before using the MD 0 MD button, the following precautions should be
noted.
I By using the MD 0 MD EDIT function, the analog recording mode
will be used.
I If the MiniDisc to be recorded on already has a disc name, the disc
name cannot be recorded over. If you want to record a new disc
name , you must erase the existing disc name before entering a new
disc name. (Page 37)
I When a playback-only MiniDisc is played, "Can't COPY NAME" will be
displayed, and the sound will be recorded but the disc name and the
track names will not be recorded.
I If a track is very short, it may be impossible to record all of the track
name .
I Both the disc name and each of the track names, you contain up to
100 characters (including spaces).
I The volume, equalizer, and signal level will be adjusted automatically.
I It is better to use the AC adaptor for the portable MD player. The
recording may be stopped if the batteries run down while recording.
I If you only want to record a particular track, or if you start recording
from a track in the middle of the disc, the recordable time will not be
displayed. If the recordable time on the target MiniDisc is insufficient,
the recording will stop in the middle of a track.
I The shorter the track names are, the shorter the period of time that
"NAME READING" will flash.
I If the MiniDisc has a scratch or is dirty , the disc name and the track
names may not be recorded. In such a case,restart the recording
again, or add the disc and track names using the DISC NAME function
and the TRACK NAME function, after you are through recording.
(Page 36)
(Continued)
REC
MODE
MULTI CONTROL
TRACK
MD MD
Total number of
recordable tracks
(When not all of the tracks can be recorded)
Total time
Time that cannot be
recorded
WW12WTRACKWW33:11WWWW
EDI TWTOTALWWWWWWWWWWW
BESTWHITSWWWWWWWWWWWW
MDWWWMDWEDI TWWWWWWWWW
WW16WTRACKWW47:00W
TOTALTTIMEWWWWWWWW
BESTWHITSWWWWWWWWW
MDWWWMDWEDI TWWWWWW
EDI T OVER 13 49
:
*27-37 98.6.23, 10:32 AM30