Filter
Top Products
22
VARIOUS CD AND MD OPERATIONS
HH
HH
H Direct-selection play
By using the track number input buttons on the remote
control, you can play any track directly, by entering its
number.
1 Select the disc to be played by pressing one of the CD PLAY
buttons (1-3) . (Only for CD playback)
2 Select the desired program source, CD or MD, by pressing
the CD H or MD H button.
3 Use the track number input buttons to select the desired track
number.
A. To select track numbers 11 to 99
Press the >10 button first, then press the track number.
For example to select 28:
1 Press the >10 button.
2 Within 5 seconds, press the "2" button.
3 Within 5 seconds, press the "8" button.
B. To select track number 100 or higher (only for MD)
Press the >10 button twice, then press the track number.
For example to select 105:
1 Press the >10 button.
2 Within 5 seconds, press the >10 button.
3 Within 5 seconds, press the "1" button.
4 Within 5 seconds, press the "10/0" button.
5 Within 5 seconds, press the "5" button.
The beginning of the selected track will be found, and play will
begin automatically.
Notes:
I A track number higher than the number of tracks on the disc cannot
be selected.
I During APMS play or random play, track number selection play is not
possible.
HH
HH
H Cue and review
1 Load a disc and begin playback.
2 Hold down the 2 button for audible fast forward, and hold
down the 3 button for audible fast reverse.
3 Normal playback will resume when the 2 or 3 button is
released.
Notes:
I If the end of the disc is reached while cueing, “DISC END” will appear,
and operation will pause. Press the CD H or MD H button to stop
operation.
When you want to listen to the disc again, press the 3 button to
locate the desired track. Normal playback will start from that point.
I When the beginning of the first track is reached, normal playback will
start.
To search very quickly
When fast forward or fast reverse is used while in the pause
mode, the playback point will move more quickly than when using
audible fast forward or audible fast reverse in the playback mode.
I In this mode, no sound is heard. Therefore, you must refer to the time
display.
I When you lift your finger, the unit will re-enter the pause mode.
HH
HH
H APSS (Auto Program Search System)
APSS automatically locates the beginning of each track.
To move to the beginning of the next track:
During playback ...Press
on the MULTI CONTROL button.
To restart the track being played:
During playback ... Press
on the MULTI CONTROL button.
When using the MULTI CONTROL button while in the stop
mode:
Each time the or on the MULTI CONTROL button is pressed,
the track number will go up or down by one. If you press the 06
button, playback will begin from the track being displayed.
MULTI CONTROL
T
U
N
I
N
G
/
C
U
R
S
O
R
> 10
54321
10/09876
MD
CD
MD
CD
TUNING/CURSOR
PLAY
1
2
3
1 2 3
PLAY
*22-26 98.6.23, 10:31 AM22