Filter
Top Products
42
(Continued)
ENTER
TIMER/
DELETE
MULTI CONTROL
3
4
5
6
Sleep operation
WWWWWADJUSTWW
WLEEPWSETWWWW
WWWWWWSETWWWW
WWWWWWSTANDBY
T
IMER
WWWWWWWW
T
T
S
WWWWWIMERT
TIMEWR
WWW
WWWWWWWWWWWWWWWWWWWWW
WWTIMEWWWW120minWW
WWWWWWWWWWWWWWWWWWWWW
WWSLEEPWWWWWSETWWWWWW
WWWWWWWWWWWWWWWWWWWWW
WWWWWWWWWWWWWWWWWWWWW
WWTIMEWWWW 35minWW
WWWWWWWWWWWWWWWWWWWWW
WWSLEEPWWWWWSETWWWWWW
WWWWWWWWWWWWWWWWWWWWW
W - WW
-12
WWW
-4
WWWW
0
W>W
R
L
SLEEPWW35
FMWSTWWWW87.5WMHz
2
3
To confirm or change the sleep
timer setting
WWWWWADJUSTWW
WLEEPWREMAINW
WWWWWWOFFWWWWT
WWWWWWWW
T
S
WWWWWLEEPS
TIMEWR
WWWWWWSTANDBYIMERT
WWWWWWSETWWWWTWWWWWIMERT
WWWWWWWWWWWWWWWWWWWWW
WWTIMEWWWW 25minWW
WWWWWWWWWWWWWWWWWWWWW
WWSLEEPWWWWWREMAINWWW
WWWWWWWWWWWWWWWWWWWWW
2
To cancel the sleep operation
WWWWWADJUSTWW
WLEEPWREMAINW
WWWWWWOFFWWWWT
WWWWWWWW
T
S
WWWWWLEEPS
TIMEWR
WWWWWWSTANDBYIMERT
WWWWWWSETWWWWTWWWWWIMERT
HH
HH
H Sleep operation
The radio, compact disc and MiniDisc can all be turned off
automatically.
1 Play the desired sound source.
2 Press the TIMER/DELETE button.
3 Press the or on the MULTI CONTROL button to select
"SLEEP SET".
4 Within 10 seconds, press the ENTER button.
I The time last stored in memory will appear.
I If you wish to use the displayed time, press the ENTER button.
The unit will be turned off automatically after the preset sleep time has
elapsed.
5 Within 10 seconds, set the sleep time using the MULTI
CONTROL button.
I The setting time is changed in 5-minute increments between 2 hours
and 5 minutes, or 1 minute increments between 5 minutes and 1
minute.
6 Press the ENTER button.
Notes:
I Once the sleep time is set, it will remain the same until the setting is
changed.
I This sleep functions of this unit cannot be used to control equipment
connected to this unit. You must use the sleep functions of the other
equipment, if it has them.
To confirm or change the sleep timer setting:
1 While in the sleep mode, press the TIMER/DELETE button.
2 Press the or on the MULTI CONTROL button to select
"SLEEP REMAIN".
3 Within 10 seconds, press the ENTER button.
I The current remaining time will appear, then after 5 seconds the
display will return to its original appearance.
To change the remaining sleep time:
1 Perform steps 1 - 2 above.
2 Change the time using the MULTI CONTROL button.
3 Within 10 seconds, press the ENTER button.
To cancel the sleep operation:
If the power is turned on, the sleep will be canceled.
The timer operation can also be canceled as follows if the power
cannot be turned off during recording.
1 While in the sleep mode, press the TIMER/DELETE button.
2 Press the or on the MULTI CONTROL button to select
"SLEEP OFF".
3 Within 10 seconds, press the ENTER button.
I The sleep operation will be canceled. ( "SLEEP" will disappear.)
38-58 98.6.23, 10:34 AM42