Filter
Top Products
307
MIDI Implementation
3. Data reception (Sequencer Section)
3.1 Messages recorded during recording
■
Channel Voice Messages
●
Note Off
Status
2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=note number: 00H - 7FH (0 - 127)
vv=note off velocity: 00H - 7FH (0 - 127)
* Not received when the Note parameter (Recording Select window) is OFF.
●
Note on
Status
2nd byte 3rd byte
9nH kkH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=note number: 00H - 7FH (0 - 127)
vv=note on velocity: 01H - 7FH (1 - 127)
* Not received when the Note parameter (Recording Select window) is OFF.
●
Polyphonic Aftertouch
Status
2nd byte 3rd byte
AnH kkH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=note number: 00H - 7FH (0 - 127)
vv=Polyphonic Aftertouch: 00H - 7FH (0 - 127)
* Not received when the Poly Afertouch parameter (Recording Select window) is OFF.
●
Control Change
Status
2nd byte 3rd byte
BnH kkH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
kk=Control number: 00H - 78H (0 - 120)
vv=value: 00H - 7FH (0 - 127)
* Not received when the Control Change parameter (Recording Select window) is OFF.
●
Program Change
Status
2nd byte
CnH ppH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
pp=Program number: 00H - 7FH (prog.1 - prog.128)
* Not received when the Program Change parameter (Recording Select window) is OFF.
●
Channel Aftertouch
Status
2nd byte
DnH vvH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
vv=Channel Aftertouch: 00H - 7FH (0 - 127)
* Not received when the Channel Aftertouch parameter (Recording Select window) is
OFF.
●
Pitch Bend Change
Status
2nd byte 3rd byte
EnH llH mmH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
mm, ll=Pitch Bend value: 00 00H - 40 00H - 7F 7FH (-8192 - 0 - +8191)
* Not received when the Pitch Bend parameter (Recording Select window) is OFF.
■
Channel Mode messages
●
All Sound Off (Controller number 120)
Status 2nd byte 3rd byte
BnH 78H 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
●
Reset All Controller (Controller number 121)
Status 2nd byte 3rd byte
BnH 79H 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
●
Omni Off (Controller number 124)
Status 2nd byte 3rd byte
BnH 7CH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
●
Omni On (Controller number 125)
Status 2nd byte 3rd byte
BnH 7DH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
●
Mono (Controller number 126)
Status
2nd byte 3rd byte
BnH 7EH mmH
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
mm=mono number: 00H - 10H (0 - 16)
* The same processing will be done as when an All Note Off message is received.
●
Poly (Controller number 127)
Status 2nd byte 3rd byte
BnH 7FH 00H
n=MIDI channel number: 0H - FH (ch.1 - ch.16)
* The same processing will be done as when an All Note Off message is received.
Fantom-X678_r_e.book 307 ページ ２００５年５月１２日 木曜日 午後４時４０分