Filter
Top Products
198
Saving/Loading a song (Save/Load)
Songs you record are initially held in Temporary Area. A song in
Temporary Area will be lost when you turn off the power or when
you load a different song. If you want to keep the song, you must
save it to user memory or a memory card.
Conversely in order to edit a song (p. 177), you must first load it into
Temporary Area.
1.
Press [SAVE/LOAD].
The Save/Load Menu screen will appear.
fig.20-001_50
2.
Press [F1 (Save S+S)]–[F3 (Save AllSmpl)] to select the
format in which you want to save the song.
Save Song+Samples:
The Temporary Song will be saved
in MRC Pro song format. A file
name extension of “.SVQ” will
automatically be added to the song.
The song will include the data of the
temporary area. All samples in
sample memory will be saved.
Save Song:
The Temporary Song will be saved
in MRC Pro song format. A filename
extension of “.SVQ” will
automatically be added. The song
will include the data of the
temporary area.
Save all Samples:
All samples in sample memory will
be saved.
✔
:
Saving is possible
The performances, patches, and system setup you are using at that
time are saved together with the sequencer data.
The performances and patches saved along with the song are special
data used to reproduce the song; they are separate from the user
performances and user patches.
* If you want to use these performances or patches in a different song, or
without reference to a song, you’ll need to save them in the user area.
* Mastering Effect settings are not included in the data saved with a
song. In order to completely reproduce the way in which the song
played back at the time it was saved, you will also need to check the
mastering settings.
Parameters included in System Setup
• Sound generator mode (Patch/Performance) and Patch/
Performance numbers
• MFX 1–3/Chorus/Reverb switch
• The selection of whether Patch mode chorus/reverb will use the
sound settings of the keyboard or of the pads
• Transpose and Octave Shift values
• The selection of the function controlled by D Beam
• All settings in the Arpeggio screen and the Arpeggio on/off
setting
• All settings in the Rhythm Group screen and the Rhythm
Pattern on/off setting
• All settings in the Chord Memory screen and the Chord
Memory on/off setting
• The selection of whether the bender, modulation, D Beam, and
knobs will be used with the keyboard or with the pads
Saving a Song (Save)
Basic Procedure
Parameter
Function
buttons
Song
ALL-
Samples
Save Song+Samples
[F1]
✔
✔
Save Song
[F2]
✔
–
Save all Samples [F3] –
✔
Data saved together with a song
Fantom-X678_r_e.book 198 ページ ２００５年５月１２日 木曜日 午後４時４０分